b'How the DisintegratorD2500 Works 2500 The D2500 is a self-contained high-powered unit consisting of a specially designed Silverson high shear rotor/stator disintegrating workhead set into a custom-built vessel coupled with a Silversonhigh shear In-Line mixer.Stage 1The unit is charged with liquid and started. Large solids are fed into the vessel and drawn down into the workhead which will rapidly shear lumps and slices off the edges and corners. These will be drawn into the interior of the workhead, driven by centrifugal force to the periphery and further sheared by the rotor tips against the edges of the stator as they are expelled radially from the head.Stage 2 Rapid fragmentation of the large solids continues until all the particles are small enough to be drawn into the workhead for further disintegration.Materials are discharged horizontally from the workhead and forced up the vessels walls, drawn into the vortex and repeatedly through the workhead for final disintegration. This cycle continues until all solids are reduced to granular size.Stage 3Once the solids are down to granular size the self-pumping Silverson In-Line mixer is started. The product is drawn from the bottom of the vessel, processed through the In-Line mixers high shear rotor/stator workhead and passed back into the top of the vessel, ensuring complete solutionor suspension.Silverson.com 56'